Trinnov Amethyst (Schwarz)

High-End Vorverstärker, Profi-Raumkorrektur
11 sources Highend Preamplifer,ADC/DAC,network Renderer, 2-ways active crossovers, Room/Speaker Optimizer included True 24bits/192k operations, 4 output processing channels., builtin Wifi.
Farbe Schwarz
Versand: 1-2 Tage
Geschäft: 1-2 Tage
11.640,00 € / Stk.
Fachhandels-Beratungs-Hotline +
+43(0)1 6982317 +
Produktberatung per Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 16 Jahre Erfahrung +

INTRODUCTION

True concentrate of advanced technologies, the Amethyst is Trinnov’s high-end stereo flagship.

It combines an 11 sources preamplifier with built-in Room/Speaker Optimizer, Trinnov’s innovative HybriD Phono Preamp, a Network Renderer, a 24 bits/192kHz DA Converter and a 2-ways intelligent active crossovers engine.

The Amethyst also features builtin Wifi connectivity for simplified operations. The perfect centerpiece of any traditionnal or modern Hifi Installation.

11 SOURCES HIGH-END PREAMPLIFIER

  • 2 balanced analog sources on XLR connectors
  • 1 single-ended analog source on Cinch connectors
  • 1 single-ended analog source on Cinch connectors switchable to Phono
  • 2 AES/EBU digital sources on XLR connectors
  • 2 Coaxial S/PDIF digital sources on Cinch connectors
  • 2 Optical S/PDIF digital sources on TosLink connectors
  • 1 High-Resolution UPnP Network Source (Ethernet, WiFi)

MM PHONO PREAMP

Trinnov HybriD Technology: innovative RIAA filter, combining an analog circuit for the low-end and a dedicated digital algorithm for the high frequencies.

HI-RESOLUTION NETWORK RENDERER

  • High Resolution file support
  • UPnP Protocol (DLNA Compatible Digital Media Renderer)
  • Supported formats: WAV, AIFF, OGG, FLAC up to 24 bits / 192 kHz

AD/DA CONVERTERS

  • A/D signal-to-noise ratio: 119 dB (A-weighted)
  • D/A signal-to-noise ratio: 118 dB (A-weighted)
  • High Performance jitter attenuation (better than 50dB above 100Hz)
  • Supported A/D sampling rates: 44.1 / 48 / 88,2 / 96 kHz
  • Supported D/A sampling rates: 44,1 / 48 / 88,2 / 96 / 176,4 / 192 kHz
  • Word Clock Input/Output

HIGH PERFORMANCE AUDIO
ADC RESOLUTION / SAMPLING RATE 24 bits/96 kHz
DAC RESOLUTION / SAMPLING RATE 24 bits/192 kHz
A/D SIGNAL-TO-NOISE RATIO 119 dB (A-Weighted)
D/A SIGNAL-TO-NOISE RATIO 118 dB (A-Weighted)
CLOCK / JITTER Variations under 25ps are recovered, jitter attenuation superior to 50 dB is achieved above 100Hz
POWER SUPPLY Independant for audio and processing sections
SAFETY COMPONENTS AntiPop relays on each analog output
DESIGN AND ASSEMBLY All Audio boards designed and manufactured by Trinnov in France
CONNECTIVITY
ANALOG I/O 2 single-ended channels inputs via 2 x cinch (47k Ohms)
ANALOG I/O 2 single-ended channels line/phono intputs via 2 x cinch (47k Ohms)
ANALOG I/O 4 single-ended channels outputs via 4 x cinch (100 Ohms)
ANALOG I/O 4 balanced channels inputs via 4 x XLR (20k Ohms)
ANALOG I/O 4 balanced channels outputs via 4 x XLR (100 Ohms)
AES I/O 4 channels inputs via 2 x XLR (110 Ohms)
AES I/O 4 channels outputs via 2 x XLR (110 Ohms)
SPDIF 4 channels inputs via 2 x cinch (75 Ohms)
SPDIF 4 channels outputs via 2 x cinch (75 Ohms)
SPDIF 4 channels inputs via 2 x toslinks
WORD CLOCK 1 input via BNC (75 Ohms)
WORD CLOCK 1 output via BNC (75 Ohms)
PROCESSING SECTION
PROCESSOR Intel Dual-Core 1,8 GHz
DATA WIDTH 64 bits, floating point
RAM 1 Go DDR3
STORAGE Flash Drive 1 GB
COOLING SYSTEM Custom heat sinks + additionnal slow fans
PHYSICAL CHARACTERISTICS
Chassis 2U
Power supply 240V AC / 50-60 Hz. Option: 130V AC
Consumption 90 W max.
Weight ∼10kg
Environnemental conditions:  – Operating: 0°C – 40°C (32°F – 104°F)
Environnemental conditions:  – Humidity: 20% – 80% relative humidity (without condensation)