Parasound ZoneMaster ZM1250 (Schwarz)

12 Kanal Verstärker für bis zu 24 Lautsprecher
12x 50W/90W RMS 8Ω/4Ω oder 2Ω, 6x 160W/200W RMS 8Ω (Bridged)/4Ω (Bridged), BxHxT: 437x108x369mm
Farbe Schwarz
Versand: anfragen
Geschäft: anfragen
3.299,00 € / Stk.
Fachhandels-Beratungs-Hotline +
+43(0)1 6982317 +
Produktberatung per Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 16 Jahre Erfahrung +
• Universal amplifier for applications from 50 to 200 watts
• 24 speaker connections (A and B outputs for all 12 channels)
• High current for stable operation at 2 Ohms
• Channel pairs are bridgeable for up to 200 watts @ 4 Ohms
• Class AB input stage plus premium Class D power stage
• Independent audio sensing triggers, one for each zone
• 6 Independent 12 volt trigger inputs, one for each zone
• Looping 12 volt trigger outputs for each zone
• Master 12 volt trigger input to turn all zones on-off
• Speaker level input for expanding systems w/out pre out jacks
• Two bus inputs can be routed to any zone
• Bus loop output jacks for passing audio to another amp
• Mono mode combines L and R for single speaker applications
• Separate level controls for all twelve channels
• Detachable speaker connectors accept up to 12 gauge wire
• Short circuit and overheat protection with front panel indicators
• 0.5 watt standby power consumption meets Energy Star & EU specs
• Compact 2U chassis
• 2U rack mounting hardware is included in box
Power Output - RMS, All Channels Driven (20 Hz - 20 kHz)     50 watts x 12 @ 8Ω 
Power Output - RMS, All Channels Driven (20 Hz - 20 kHz)     90 watts x 12 @ 4Ω or 2Ω 
Power Output - RMS, All Channels Driven (20 Hz - 20 kHz)     160 watts x 6 @ 8Ω (Bridged) 
Power Output - RMS, All Channels Driven (20 Hz - 20 kHz)     200 watts x 6 @ 4Ω (Bridged)
Frequency Response     10 Hz - 60 kHz, +0/-3 dB
Total Harmonic Distortion     < 0.05% at typical listening levels 
Total Harmonic Distortion     < 1.0% at full power
Interchannel Crosstalk     70 dB at 20 kHz
Input Sensitivity:     700mv = Full output (50 Watts @ 8 Ω) 
Input Sensitivity:     Total Gain = 29 dB (Level controls set to Maximum)
S/N Ratio     > 112 dB, input shorted, IHF A-weighted
DC Trigger Requirements     +9 Vdc to +12 Vdc, 2 mA
Audio Trigger Requirements     2 mV Audio Signal
AC Power Requirement:     1500 Watts Maximum 
AC Power Requirement:     100 Watts Typical 
AC Power Requirement:     38 Watts Idle (All Zones on) 
AC Power Requirement:     12 Watts Idle (One Zone on) 
AC Power Requirement:     0.5 Watts Standby 
AC Power Requirement:     110-130 VAC 60 Hz or 220-255 VAC 50 Hz 
AC Power Requirement:     Note: AC mains voltage is set only by qualified electronics technician.
Dimensions:    Width: 17.25" (437 mm) 
Dimensions:    Depth: 14.5" (369 mm) 
Dimensions:    Height, with feet: 4.25" (108 mm) 
Dimensions:    Height, without feet: 3.5" (89 mm)
Weight:      Net: 17 lbs (2.0kg) 
Weight:      Shipping: 23 lbs (3.4kg)