Monitor Audio Platinum PLW 215 II (Schwarz hochglanz)

Subwoofer
2 x 15” C-CAM® sub-woofer driver
Dual amplifier design - 1400 Watts (RMS)
Room Correction EQ
Farbe Schwarz hochglanz
Versand: lagernd
Geschäft: 2-4 Tage
5.999,00 € / Stk.
Fachhandels-Beratungs-Hotline +
+43(0)1 6982317 +
Produktberatung per Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 16 Jahre Erfahrung +

Zwei 15" C-CAM Treiber, dreifach aufgehängt für bis zu 4 cm Auslenkung und individuell angetrieben von DSP-gesteuerten Verstärkern, liefern saubere Frequenzen bis hinunter zu 16 Hz. Bei diesen Werten wirkt der Bass wie eine Erschütterung, die Sie von Kopf bis Fuß spüren. Er geht nahtlos auf den PL500 II über, der für atemberaubenden Klang sogar jenseits Ihrer Hörgrenze sorgt - mit einer physischen Dimension, die von allen Sinnen aufgenommen wird. Kurz gesagt: der Klang der Natur, plastisch neu erzeugt.

Trotzdem wäre all diese explosive Audiokraft ohne Steuerung vergeudet. Passen Sie den Raumfrequenzgang des PLW215 II auf dem oberen Bedienfeld oder per Laptop mit unserer urhebergeschützten ‘SubConnect’ Software an. Innerhalb dieser globalen Einstellung bietet der 24bit DSP vier komplett konfigurierbare Benutzer-Voreinstellungen pro Eingabe, einschließlich EQ-Voreinstellungen Normal/Musik/Film/Individuelle Anpassung für EQ-Einstellungen. Für eine Feinabstimmung können Sie Frequenz, Filtersteilheit, Filterbreite und EQ-Filter für jede Voreinstellung anpassen. Es gibt auch einen Nachtmodus, in dem der dynamische Bereich lauterer Stellen aktiv auf die von Ihnen gewünschte Lautstärke herabgeregelt wird.

Der PLW215 II ist der kraftvollste, ausgeklügeltste und am natürlichsten klingende Basslautsprecher, den wir je gebaut haben und ergänzt unsere Vorzeigereihe Platinum II mit makelloser Präzision.

SPECIFICATION
System Format Sealed Cabinet with vibration cancelling driver configuration, 25mm M.D.F. construction with internal bracing and sealed amplifier compartment
Low Frequency Limit (-6dB - IEC 268-13) -3dB @ 23Hz / -10dB @ 18Hz (Free Field) default preset: Music, -3dB @ 19Hz / -10dB @ 16Hz (In Room) default preset: Music, Limited by low frequency protection filter (-3dB @ 12Hz)
Upper Frequency Limit -3dB @ 150Hz
Driver Complement 2 x 15” C-CAM® sub-woofer drivers featuring inverted surround and triple suspension for increase support at high excursions, 
Driver Complement Black single layer edge wound 3” voice coil with vented pole, vented coil and black CED coated motor unit to reduce power compression and increase thermal dissipation, 
Driver Complement FEA optimised cone, magnetics and suspensions for optimal performance and increased linearity
Linear Driver Excursion 42mm Peak to Peak,
Linear Driver Excursion Total displacement 6.4 Litres
Amplifier Power Output Dual Amplifier design with a single amplifier powering each driver, 
Amplifier Power Output Combined 1400W RMS, 2000W Peak (Burst Ratio 1:4 Continuous,
Amplifier Power Output Measured into two non-reactive 4 Ohm Loads)
Amplifier Classification 2x Class-D amplifiers, Balanced Differential Input, Differentially loaded Power Supply, DSP controlled. High current Switch mode power supply (SMPSU)
DSP 172MHz DSP Core with 3500 instructions per sample, 139dB of dynamic range and 56-bit double precision processing, dynamically updated by an 80MHz MCU
Digital Conversion Wolfson Microelectronics (Cirrus Logic) ADC & DAC @ 24bit/48KHz. (WM8786 ADC & WM8740 DAC)
LED UI Control Panel Adjustable brightness 0% - 100%, configurable auto off feature. Quick access to menu items: Trim, LPF, Phase, Preset Select
Global Settings (via SubConnect) Display Brightness (0-100%), Dim (to 50% or to Off), Default Preset, Mute Link Outputs, 12V Trigger Assignment (Power on/off or Preset select), Input gain (Master -80 to +20dB, Trim -6 to +6dB, Mute), Phase (0-360 in 15 degree steps), Night Mode Threshold (-2dB to -20dB), Auto On / OFF (Enable Signal Sense, Always On, Time to off 5-240mins)
User Presets (via SubConnect) 4 fully configurable user Presets including, Preset Name, LPF Frequency (5Hz Steps from 20-135Hz), LPF Slope Order (-12 or -24dB/Oct), Input (Stereo, LFE or Both), Trim Offset (-6 to +6dB), EQ mode (Impact, Music, Movie or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On/OFF), Night Mode (On/OFF)
User Equalisation (via SubConnect) 6 fully controllable EQ filters and 6 default filters with gain offset per preset, 
User Equalisation (via SubConnect) Default settings: Flat / Music / Movie / Impact
Room Correction EQ 6 System controlled parametric EQ filters set using advanced detection algorithm. Measurement can be initiated from the control panel or the SubConnect with up to microphone 6 positions (default 2)
Night Mode Night mode, assignable (on or off) per Preset with global threshold (-2dB to -20dB). Introduces dynamic range reduction lowering the level of loud sections
Phase control 0-360 degrees, Increments of 15 degrees with a pure invert at 180 degrees
Low pass filter 2nd or 4th order (12 or 24 dB/Octave), Increments of 5Hz from 35Hz to 135Hz
Auto Sensing input level requirements Line Level >1mV on unbalanced and balanced inputs. Auto Standby feature, adjustable between 5-240 minutes in increments of 5mins
Digital Volume Control -11 to +11dB in 1dB increments, Via the control panel. -80 to +20 in 1dB increments, via SubConnect application
IR Remote control code Supplied IR remote. Front facing IR receiver with red LED response. Additional discrete IR codes for automation available in the manual
SubConnect (PC Application) Windows (7 onwards) (32/64bit) compatible setup application available from the Monitor Audio website and on the supplied USB stick in the Platinum II Tool Kit 
SubConnect (PC Application) Allows the user to control advanced subwoofer setup features. Settings can be saved while not connected to the subwoofer for off sight setup
Audio Input Connection LFE Input with Balanced (XLR) and Unbalanced (RCA) inputs, Stereo Input with unbalanced (RCA) inputs. Inputs individually assignable to any Preset
Control Connections/ interfaces 12v Trigger in (3.5mm mono mini-jack, 6v threshold), assignable to On/Off or Preset change, 3.5mm Microphone input jack (mic supplied), RJ45 connector supporting RS232 (EIA/TIA - 561, Tx Pin 6, Rx Pin 5, Gnd Pin 4), IR repeater – Output (3.5mm mono mini-jack), USB – Type B, for connecting to SubConnect PC application and Firmware update
Electrical Certifications CE / CB/ ETL / Fcc / ErP (Energy saving compliant)
Mains input voltage 100 - 120 Vac / 220 - 240 Vac 50/60Hz (Manually selected)
Power consumption Maximum 1200W, Standby <0.5W (ErP compliance)
Fuse Type 20mm T12.5AL 250VAC
Weight (unpacked) 57.54 kg
Dimensions (H x W x D) (Inc. amp, drivers & feet) 546.3 x 504 x 512mm