Home/Sortiment/Hören & Klang/Phonovorverstärker
Parasound Z-Phono XRM (Schwarz)
Phono Vorverstärker
Phono Vorverstärker, nicht für Rackmontage geeignet
BxHxT: 242x51x254mm
Farbe Schwarz
Versand: lagernd
Geschäft: 3-5 Tage
799,00 € / Stk.
Fachhandels-Beratungs-Hotline +
+43(0)1 6982317 +
Produktberatung per Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 16 Jahre Erfahrung +
+43(0)1 6982317 +
Produktberatung per Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 16 Jahre Erfahrung +
Frequency Response | 20-20 kHz, +/- 0.2 dB |
Total Harmonic Distortion | 0.02% at 1 kHz |
Signal to Noise Ratio, MM 40 dB Setting | > 94 dB, input shorted, IHF A-weighted |
Signal to Noise Ratio, MM 40 dB Setting | > 90 dB, input shorted, unweighted |
Signal to Noise Ratio, MM 50 dB Setting | > 94 dB, input shorted, IHF A-weighted |
Signal to Noise Ratio, MM 50 dB Setting | > 90 dB, input shorted, unweighted |
Signal to Noise Ratio, MC 50 dB Setting | > 92 dB, input shorted, IHF A-weighted |
Signal to Noise Ratio, MC 50 dB Setting | > 88 dB, input shorted, unweighted |
Signal to Noise Ratio, MC 60 dB Setting | > 82 dB, input shorted, IHF A-weighted |
Signal to Noise Ratio, MC 60 dB Setting | > 80 dB, input shorted, unweighted |
Inter-channel Crosstalk | > 80 dB at 1 kHz |
Input Impedance | MM: 47k Ω |
Input Impedance | MC: 50-1050 Ω |
Output Impedance | Unbalanced: 150 Ω |
Output Impedance | Balanced: 150 Ω per leg |
Input Sensitivity at 1 kHz, 4mV Input | 40 dB: 5 mV for 500mV output |
Input Sensitivity at 1 kHz, 4mV Input | 50 dB: 5 mV for 1.5 Volts output |
Input Sensitivity at 1 kHz, 4mV Input | 60 dB: 5 mV for 3 Volts output |
Input Sensitivity at 1 kHz, 1V Output | 40 dB: 10 mV for 1.0 Volt output |
Input Sensitivity at 1 kHz, 1V Output | 50 dB: 3.5 mV for 1.0 Volt output |
Input Sensitivity at 1 kHz, 1V Output | 60 dB: 1.8 mV for 1.0 Volt output |
Total Gain | 40 dB / 50 dB / 60 dB (unbalanced output) |
Total Gain | 46 dB / 56 dB / 66 dB (balanced output) |
Rumble Filter | 40 Hz high pass, 18 dB /oct. |
AC Power Requirement | Standby: 0 watts |
AC Power Requirement | Power On: 7 watts |
AC Power Requirement | 115 VAC or 230 VAC 50 - 60 Hz |
AC Power Requirement | (Selected on bottom) |
Dimensions | Width: 8.5" (220 mm) |
Dimensions | Depth: 10" (254 mm) |
Dimensions | Depth: 12" (305 mm) - cables connected |
Dimensions | Height, with feet: 2" (51 mm) |
Dimensions | Height, without feet: 1.75" (45 mm), 1U |
Weight | Net: 3.9 lbs. (1.8kg) |
Weight | Shipping: 6.8 lbs. (3.1 kg) |