Parasound JC-2 BP

Vorverstärker
2 Kanal Vorverstärker mit Theater Bypass Function
Versand: lagernd
Geschäft: 3-6 Tage
-7% statt 6.499,00 € ab 5.990,00 € / Stk.
Fachhandels-Beratungs-Hotline +
+43(0)1 6982317 +
Produktberatung per Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 16 Jahre Erfahrung +
  • Home theater bypass enables seamless blending into a digital surround system
  • Home theater bypass functions with both unbalanced & balanced inputs and outputs
  • Home theater bypass function can be assigned to any input
  • Bypass remains selected after unit has been turned off
  • Improved remote control is included with the bypass assignment keys
  • Specifications and sonic performance are 100% the same as the original JC 2
  • 6 pairs unbalanced RCA line-level audio input jacks
  • 2 input pairs can be switched to XLR balanced connectors
  • Independent balanced/unbalanced select for the L & R channel
  • Each channel’s input is switched by its own gold-on-silver contact relay
  • 4 output jack pairs with specialized functions:
  • 1 Main output jack pair is balanced XLR, polarity is switched by remote
  • 1 Main output jack pair is unbalanced RCA, polarity is switched by remote
  • 1 output jack pair is unbalanced RCA, inverted polarity only
  • 1 output pair is unbalanced RCA, normal polarity, fixed level for recorders
  • Dual-mono left & right channel circuit boards minimize crosstalk
  • Hand-matched complementary FETs
  • Direct DC servo-coupled, no capacitors in the signal path
  • Premium 4-gang motor-driven analog master volume control
  • Separate TKD brand analog gain controls for L & R channel
  • 3/8" thick aluminum shielding around audio boards
  • Shielding prevents noise from power supplies & control circuits
  • Separate output jacks for simultaneous normal & non-inverting polarity
  • Aluminum chassis rear panel
  • Remote control polarity switching uses gold-on-silver contact relays
  • Vampire brand 24k gold-plated RCA jacks
  • Neutrik brand premium XLR connectors
  • Canare brand internal wiring
  • High capacity R-core audio power transformer & inductor
  • Hyper-fast soft recovery audio bridge rectifiers diodes
  • Independent power supply for controller, relay coils, triggers, LEDs
  • Remote control handset controls all functions
  • Discrete IR codes for remote control
  • Four 12v trigger output jacks for power amp auto turn-on:
  • Two 12v trigger jacks are switched by the remote handset
  • Two 12v trigger jacks are live when the JC 2 is turned on
  • Two-way RS-232 serial port connection
  • Line level inputs only; no inputs for phono
  • Audio mute is switched by independent L & R relays
  • Rear panel IR repeater input & loop out jacks
  • Premium detachable heavy gauge IEC AC cord
  • 2 6’ (2m) trigger wires included
  • Remote handset also controls Parasound Halo T 3 Tuner
  • 3u Chassis, rack mountable with HRA3 (sold separately)
  • Parasound 5 year parts, 5 years labor warranty (For USA and Canada purchases only)
Frequency Response 5 Hz - 100 kHz, +0/-3 dB
Distortion THD: < 0.003% at 100 Hz 
Distortion THD: < 0.005% at 20 kHz 
Distortion IM: < 0.003% 
S/N Ratio > 116 dB, input shorted, IHF A-weighted
S/N Ratio > 104 dB, input shorted, unweighted
Crosstalk > 100 dB at 10 kHz
Crosstalk > 90 dB at 20 kHz
Gain 14 dB, maximum
L, R Gain Control Range - 10 dB
Input Impedance Unbalanced: 30k ohms
Input Impedance Balanced: 30k ohms per leg
Output Impedance Unbalanced: < 60 ohms
Output Impedance Balanced: < 60 ohms per leg
Input Sensitivity 200 mV for 1 V output
Input Sensitivity Total Gain: 14 dB
Input Sensitivity Maximum Output: 8 V
XLR Pin Identification 1 = Ground (Shield)
XLR Pin Identification 2 = Positive
XLR Pin Identification 3 = Negative (Return)
AC Power Requirement 110 - 120 V or 220-240 V, 50 - 60 Hzs
AC Power Requirement (Set AC Voltage switch on rear panel)
AC Power Requirement 25 watt standby; 30 watts when turned on
Dimensions Width: 17 1/4" (437 mm)
Dimensions Depth: 16" (406 mm)
Dimensions Height, with feet: 5 7/8" (150 mm)
Dimensions Height, without feet: 5 1/4" (133 mm)
Weight Net: 24 lbs. (11 kg)
Weight Shipping: 36 lbs. (16.4 kg)
Rack Mount Accessory HRA 3 (May be purchased separately)