Parasound P-6

Stereo Vorverstärker
2.1 Kanal Stereo Vorverstärker & DAC BxHxT: 437x105x381mm
Versand: 3-6 Tage
Geschäft: 3-6 Tage
ab 2.199,00 € / Stk.
Fachhandels-Beratungs-Hotline +
+43(0)1 6982317 +
Produktberatung per Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 16 Jahre Erfahrung +
Frequency Response 10 Hz - 100 kHz, +0/-3 dB
Frequency Response 20 Hz - 20 kHz, +0/-0.5 dB
Total Harmonic Distortion (THD) < 0.01 %
Interchannel Crosstalk > 70 dB at 20 kHz
Interchannel Crosstalk > 78 dB at 1 kHz
Preamplifier Stage Input Sensitivity 300 mV in for 1 V
Preamplifier Stage Input Sensitivity Total Gain: 10 dB
Preamplifier Stage Input Sensitivity Max Output: 7.5V
S/N Ratio - Line Inputs 1- 5 > 108 dB (shorted, IHF A-weighted)
S/N Ratio - Line Inputs 1- 6 > 88 dB (shorted, unweighted)
S/N Ratio - DAC Inputs > 108 dB (IHF A-weighted)
S/N Ratio - DAC Inputs > 88 dB (unweighted)
S/N Ratio - Phono Input MM > 80 dB (shorted, IHF A-weighted)
S/N Ratio - Phono Input MM > 70 dB (shorted, unweighted)
S/N Ratio - Phono Input MC > 67 dB (shorted, IHF A-weighted)
S/N Ratio - Phono Input MC > 55 dB (shorted, unweighted)
Phono Stage Sensitivity / Input Impedance MM: 38 dB / 47 k Ω
Phono Stage Sensitivity / Input Impedance MC: 52 dB / 47 k Ω or 100 Ω
Input Impedance Unbalanced: 24 k Ω
Input Impedance Balanced: 100 k Ω per leg
Preamplifier Output Impedance Unbalanced: 100 Ω
Preamplifier Output Impedance Balanced: 470 Ω per leg
High & Low Pass Crossover Slope 12 dB per octave
Supported DAC Sampling Rates USB: up to 384 kHz / 32-bit PCM
Supported DAC Sampling Rates DSD Native: DSD 64, DSD 128, DSD 256
Supported DAC Sampling Rates DSD over PCM (DoP) at 384 kHz
Supported DAC Sampling Rates Coax/Optical: up to 192 kHz / 24-bit PCM
Digital to Analog Converter ESS Sabre32 Reference ES9018K2M
Digital to Analog Converter 384 kHz / 32-bit
USB 2.0 Controller Savitech SA9227, 384 kHz / 32-bit
Headphone Amplifier Texas Instruments TPA6120A
Headphone Amplifier Output Impedance 10 ohms
XLR Pin Identification 1 = Ground (Shield)
XLR Pin Identification 2 = Positive
XLR Pin Identification 3 = Negative (Return)
Dimensions Width: 17-1/4" (437 mm)
Dimensions Depth: 15" (381 mm)
Dimensions Depth, with cables 17" (432 mm)
Dimensions Height, with feet: 4-1/8" (105 mm)
Dimensions Height, without feet: 3-1/2" (89 mm), 2U
Net Weight 14 lb. (6.3 kg)
Shipping Weight 21 lb. (9.5 kg)
Power Requirement Standby: 0.5 watts
Power Requirement Power On: 15 watts
Power Requirement 100-250 VAC 50/60 Hz (automatic)10 Hz - 100 kHz, +0/-3 dB
Power Requirement 20 Hz - 20 kHz, +0/-0.5 dB