JL-Audio Fathom IWSv2-SYS-113

Einbau-Subwoofer
Sealed enclosure with one (1) 13.5'' (345mm) dia. subwoofer driver. 1000W amplifier/processor
Versand: 2-4 Tage
Geschäft: 2-4 Tage
5.490,00 € / Set
Fachhandels-Beratungs-Hotline +
+43(0)1 6982317 +
Produktberatung per Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 16 Jahre Erfahrung +

The same minds that engineered JL Audio’s reference-grade Fathom® and Gotham® powered subwoofers have created an amazing in-wall subwoofer solution, centered on an innovative, thin-line driver with groundbreaking technologies.


Housing this exotic driver is a critically engineered enclosure with a unique floating mount design to minimize wall excitation. The enclosure features extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness.


A paintable, fine steel-mesh grille, also designed to control vibration, is included for each enclosure in a system.


The IWSv2-SYS-113 is driven by a rack-mountable, purpose-tuned amplifier, capable of delivering up to 1 kW of clean power, and armed with serious processing features, including our acclaimed Digital Automatic Room Optimization system.


There is no need to lower your expectations when selecting this remarkable in-wall solution... it's a real Fathom®.


The IWSv2-SYS-113 is available to fit a variety of 2" x 4" and 2" x 6" wall studs. Consult your Authorized JL Audio Dealer for specific application information.


Enclosure Finish: Flat Black (hidden from view when installed)


Grille finish: Primer White (paintable)


Enclosure Construction: CNC-Cut Birch Plywood


Enclosure Type: Sealed
Enclosure Finish: Black Texture-Coated
Frequency Response (Anechoic): 26 Hz - 101 Hz (± 1.5 dB);
-3dB at 25 Hz / 112 Hz;
-10dB at 22 Hz / 150 Hz
Effective Piston Area (Sd): 196.51 sq in / 0.1268 sq m
Effective Displacement: 294.6 cu in / 4.82 L
Amplifier Power: 2000 W RMS short-term
Power Mode(s): Off, On or Automatic (Signal-Sensing)
Light Modes: Off, On or Dim
Unbalanced Inputs: Stereo or Mono (two RCA jacks)
Balanced Inputs: Stereo or Mono (two female XLR jacks)
Speaker/High-Level Inputs: N/A
Input Grounding: Isolated or Grounded
Input Modes: Master or Slave
Level Control: Reference (fixed gain) or Variable, from full mute to +15dB over reference gain
Filter Mode(s): Low-Pass
Filter Slope(s): 12/24 dB/octave
Filter Frequency Range: 30 Hz - 130 Hz
Filter Defeat Function: Yes
Polarity: 0 or 180 degrees
Phase: Variable, 0- 270 degrees, referenced to 80 Hz
Extreme Low Frequency (E.L.F.) Trim: Variable, -12 dB to +3 dB at 23 Hz
Line Outputs: N/A
Output to Slave: Balanced (one male XLR jack)
Calibration Mode: Digital Automatic Room Optimization (D.A.R.O.), includes laboratory-grade microphone
Wall Cavity Width (W): Minimum: 14.375 in / 365 mm Maximum: 14.875 in / 378 mm
Wall Cavity Height (H):

Minimum: 93.625 in / 2,378 mm

Width (W): 13.75 in / 349 mm
Height (H): 70 in / 1,778 mm
Depth (D): 2.94 in / 75 mm
Wall Cavity Width (W): Minimum: 14.375 in / 365 mm Maximum: 14.875 in / 378 mm
Wall Cavity Height (H): 93.625 in / 2,378 mm
Width (W): 13.75 in / 349 mm
Height (H): 55 in / 1,397 mm
Depth (D): 4.70 in / 119 mm
Width (W): 17.4 in / 442 mm
Height (H): 3.5 in / 89 mm
Depth (D): 17.9 in / 455 mm
Net Weight: 43 lb / 19.5 kg
Grille Height (H): 17.64 in / 448 mm
Grille Width (W): 17.14 in / 435 mm
Wall Opening Height (H): 16.50 in / 419 mm
Wall Opening Width (W): 16.00 in / 406 mm;