Parasound HINT6 Halo (Schwarz)

Integrated Amp 2.1 Kanal Vollverstärker und DAC
2.1 Kanal Vollverstärker, 2x 160W/240W RMS 8Ω/4Ω, BxHxT: 437x150x406mm
Farbe Schwarz
Versand: lagernd
Geschäft: 2-4 Tage
4.298,00 € / Stk.
Fachhandels-Beratungs-Hotline +
+43(0)1 6982317 +
Produktberatung per Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 16 Jahre Erfahrung +

New Features (Changes from the original Halo Integrated)

  • Burr Brown analog resistor ladder volume control
  • Dimmable front panel volume display
  • Updated USB receiver is Plug and play with Windows 10 and MAC
  • An additional optical input (2 total)
  • Ball bearing supported solid aluminum volume knob
  • Programable default turn on volume setting
  • Favorite volume memory with remote control button
  • Increased phono stage gain for lower output cartridges
  • Improved Left/Right channel separation and balance tracking
  • Updated cosmetics with subtle gold highlights

Preamp and DAC Features

  • ESS Sabre32 Reference DAC (ES9018K2M)
  • Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
  • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
  • Coax and optical inputs accept PCM up to 192kHz/24-bit
  • Analog bass management with high & low pass crossovers
  • Home theater bypass input for surround sound integration
  • Front panel subwoofer level control
  • Dedicated high current headphone amplifier (TI TPA6120)
  • Phono input for MM, MC and MI with 100 Ω or 47k Ω load
  • Front panel Aux input with automatic +12 dB gain stage
  • 5 pairs RCA line level Analog inputs
  • 1 pair XLR balanced Analog input
  • Balanced XLR and RCA left and right preamp outputs
  • 1 balanced XLR and 2 RCA subwoofer outputs
  • Bass & treble controls with relay bypass from remote or front panel
  • Rear panel IR input and IR loop output jacks
  • 12 Volt trigger output
  • Back-lit remote control with discrete buttons
  • 0.5w standby power consumption meets Energy Star & EU specs

Power Amp Features

  • 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
  • 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
  • Power amp circuit topology designed by legendary John Curl
  • Direct amplifier input to bypass preamp section
  • High bias class A/AB operation
  • Oversized shielded toroid power transformer
  • Dual-mono power supply and power amplifier
  • 40,000uF power supply filter capacitance
  • Matched JFET input stages and MOSFET driver stages
  • 12 high voltage/high current bipolar output transistors
  • Heavy-duty 24k gold-plated 5-way speaker binding posts
  • Over temp and short circuit relay protection
Power Output - Both channels driven (0.9% THD, 20 Hz - 20 kHz)
Power Output - Both channels driven 180 watts x 2 @ 8 Ω RMS
Power Output - Both channels driven 270 watts x 2 @ 4 Ω RMS
Current Capacity 45 amps peak per channel
Frequency Response 10 Hz - 100 kHz, +0/-3 dB
Frequency Response 20 Hz - 20 kHz, +0/-0.5 dB
Total Harmonic Distortion (THD) < 0.01 %, average listening levels
Total Harmonic Distortion (THD) < 0.05 %, 160 watts x 2 @ 8 Ω
Interchannel Crosstalk > 70 dB at 20 kHz
Interchannel Crosstalk > 78 dB at 1 kHz
Signal to Noise Ratio - IHF A-weighted Line in: - 103 dB (input shorted)
Signal to Noise Ratio - IHF A-weighted Digital in: - 106 dB
Amplifier Damping Factor > 800 at 20 Hz
Preamplifier Stage Input Sensitivity 300 mV in for 1 V at Preamp Output jacks
Preamplifier Stage Input Sensitivity Total Preamp Stage Gain: 10 dB
Preamplifier Stage Input Sensitivity Max Output Unbalanced: 7 V
Preamplifier Stage Input Sensitivity Max Output Balanced: 9 V
Power Amplifier Stage Sensitivity 1 V at Bypass/Amp In for 28 V at Speaker Out
Power Amplifier Stage Sensitivity Total Amp Stage Gain: 28 dB
Phono Stage Sensitivity / Input Impedance MM: 41 dB / 47 k Ω
Phono Stage Sensitivity / Input Impedance MC: 54 dB / 47 k Ω or 100 Ω
High & Low Pass Crossover Slope 12 dB per octave
Supported DAC Sampling Rates USB: up to 384 kHz / 32-bit PCM
Supported DAC Sampling Rates DSD Native: DSD 64, DSD 128, DSD 256
Supported DAC Sampling Rates DSD over PCM (DoP) at 384 kHz
Coax/Optical: up to 192 kHz / 24-bit PCM
Digital to Analog Converter ESS Sabre32 Reference ES9018K2M
Digital to Analog Converter 384 kHz / 32-bit
USB 2.0 Controller Savitech SA9227, 384 kHz / 32-bit
Headphone Amplifier Texas Instruments TPA6120A
Headphone Amplifier Output Impedance 10 ohms
XLR Pin Identification 1 = Ground (Shield)
XLR Pin Identification 2 = Positive
XLR Pin Identification 3 = Negative (Return)
Input Impedance Unbalanced: 24 k Ω
Input Impedance Balanced: 100 k Ω per leg
Preamplifer Output Impedance Unbalanced: 100 Ω
Preamplifer Output Impedance Balanced: 470 Ω per leg
Dimensions Width: 17-1/4" (437 mm)
Dimensions Depth: 16-1/4" (413 mm)
Dimensions Depth, with cables 17-1/4" (437 mm)
Dimensions Height, with feet: 5-7/8" (150 mm)
Dimensions Height, without feet: 5-1/4" (133 mm), 3U
Net Weight 33 lb. (15 kg)
Shipping Weight 45 lb. (20.4 kg)
Power Requirement Standby: 0.5 watts
Power Requirement Idling power: 70 watts
Power Requirement Maximum: 750 watts
Power Requirement 110-125 VAC 60 Hz or 220-250 VAC 50 Hz
Power Requirement AC mains voltage is set on rear panel